Post by coldspaces on Sept 18, 2013 1:57:56 GMT
Not sure were best to put this as it is gonna cover so many models, Chrisj feel free to move it if you think it fits in a better elsewhere.
I did not realize my 1979 Ranco controls cross reference lists so many of our old controls in the back section by part #. Don't show them all in the GE or Hotpoint section.
Anyway I will list everything I can find for our machines it shows. Not sure all of these are still made by Ranco but even if not I will try to list what other brands they cross to at the end.
Here is the page for the one knob controls.
Page for the two knob controls
Please keep in mind that the two knob controls almost all had the compressor overload built in them. These replacement controls have no overload so you will have to add one somewhere near the control or compressor or risk burning out your compressor or starting a fire.
All 4 controls marked with an x were not listed in Ranco cross reference, looks like temps specs on 3 of them are the close to the same as most of the rest though so if it can be mounted properly with the adapters that come with the Ranco A30-180 it should work. For all other controls on this page the Ranco A30-180 is recommended. This control is still made as it is the one I put in my 48 GE Spacemaker recently.
Ranco A10-669 also a Mars 26244 and a Robertshaw 3030-501 should work
Ranco A10-670 also a Mars 26244 and a Robertshaw 3030-501 should work
Ranco A30-180 also a Mars 26244 and a Robertshaw 3030-501 should work
CA refrigerating machines
At this time I have only these part # on a CA control from cablehack of S4X126 and CR1057-B16 for which I see no listed replacement.
Not sure if this is a Number from a monitor top or not but in the Mars cross reference I found listed a CR1057-B11 it crosses to a Mars 26272
DR refrigerating machines
I see none of the numbers listed in the DR manual in my Ranco book. Not surprising as they would never have been a bolt in job on these.
I did not realize my 1979 Ranco controls cross reference lists so many of our old controls in the back section by part #. Don't show them all in the GE or Hotpoint section.
Anyway I will list everything I can find for our machines it shows. Not sure all of these are still made by Ranco but even if not I will try to list what other brands they cross to at the end.
Here is the page for the one knob controls.
Page for the two knob controls
Please keep in mind that the two knob controls almost all had the compressor overload built in them. These replacement controls have no overload so you will have to add one somewhere near the control or compressor or risk burning out your compressor or starting a fire.
All 4 controls marked with an x were not listed in Ranco cross reference, looks like temps specs on 3 of them are the close to the same as most of the rest though so if it can be mounted properly with the adapters that come with the Ranco A30-180 it should work. For all other controls on this page the Ranco A30-180 is recommended. This control is still made as it is the one I put in my 48 GE Spacemaker recently.
Ranco A10-669 also a Mars 26244 and a Robertshaw 3030-501 should work
Ranco A10-670 also a Mars 26244 and a Robertshaw 3030-501 should work
Ranco A30-180 also a Mars 26244 and a Robertshaw 3030-501 should work
CA refrigerating machines
At this time I have only these part # on a CA control from cablehack of S4X126 and CR1057-B16 for which I see no listed replacement.
Not sure if this is a Number from a monitor top or not but in the Mars cross reference I found listed a CR1057-B11 it crosses to a Mars 26272
DR refrigerating machines
I see none of the numbers listed in the DR manual in my Ranco book. Not surprising as they would never have been a bolt in job on these.