CK-30-C16 oil clogged Evap.

jc
5 Cubic Foot

Posts: 64

CK-30-C16 oil clogged Evap. Aug 9, 2021 15:25:49 GMT ckfan and turbokinetic like this

Quote

Post by jc on Aug 9, 2021 15:25:49 GMT

Awesome! Yes, I read that note as well. I was even more suspect once I took a temperature reading of the shelf and poured a little liquid on there and realized it froze so quickly. I will add that when I turn it on, the middle shelf gets cold just as quickly as the rest of the evap. Perhaps it is nothing more than just a quirky airflow issue in this larger CK30.

Thanks all!

Once I put it all back together with the new seals I will report here if the frost pattern changes any.

ChrisJ Administrator Posts: 2,501	CK-30-C16 oil clogged Evap. Aug 9, 2021 17:32:04 GMT ckfan likes this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by ChrisJ on Aug 9, 2021 17:32:04 GMT Is it simply not running as cold as the rest, or is it actually defrosting during off periods?
	CA-2-A16 S/N 3326603 Porcelain cabinet with right hand door and capillary tube conversion. Restored and in use. CA-2-B16 S/N 4126576 Painted cabinet with left hand door. Has bad float valve and needs paint. CA-2-B16 S/N 41-944-942 Porcelain cabinet with right hand door. Has cracked liquid line, bad float valve and needs paint. CK-2-B16 S/N 5320471 top only currently being restored

jc 5 Cubic Foot Posts: 64	CK-30-C16 oil clogged Evap. Aug 9, 2021 19:08:51 GMT ckfan and turbokinetic like this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by jc on Aug 9, 2021 19:08:51 GMT There is no evidence of defrosting that I can see and I have a pan under the evap. No drips or frozen drips on the lines or bottom of the evap either.

Post by jc on Aug 9, 2021 15:25:49 GMT

Post by ChrisJ on Aug 9, 2021 17:32:04 GMT

Post by jc on Aug 9, 2021 19:08:51 GMT