|
|
Post by sittingrabbitjason on Oct 16, 2020 1:12:39 GMT
 I need scews for my plate. Where do I get them and what size? |
|
|
|
Post by jake on Oct 16, 2020 18:20:06 GMT
This is just a shot in the dark but a lot of times manufacturers will use the same screws, rivets, etc. to hold different things onto a product. Try a screw from the control plate, relay box, etc. You might get lucky. Then you can take that screw to your local Home Depot, Lowe's, or hardware store for them to match up. Hope that helps!
|
|
|
|
Post by sittingrabbitjason on Oct 17, 2020 4:00:34 GMT
Thanks!
|
|
|
|
Post by Travis on Oct 19, 2020 22:27:00 GMT
They're #4. You can buy them at most any hardware store.
|
|
|
|
Post by sittingrabbitjason on Oct 20, 2020 6:11:41 GMT
Thanks!
|
|
|
|
Post by elec573 on Oct 24, 2020 2:59:50 GMT
monitortop.freeforums.net/thread/951/ck-2-b16 Welcome to the forum as others have told you it’s a ck b16 . I have the same fridge it’s my avatar, it’s been working great for a few years now no problems. Posted a link if you’re interested with some pictures. I’ve completely restored mine except for the refrigerant,I’ve not had to do anything with that . I’d recommend looking for a chiller tray , (eBay is a great place to look) , and getting the door sticker that goes on the inside. You can order a sticker from the suppler section. monitortop.freeforums.net/thread/938/inner-door-decal-reproductionIf have questions I’ll be happy to share what I’ve learned about mine, you can send a pm through the forum or just post. I’m sure others will be happy to answer questions as well !
|
|
|
|
Post by sittingrabbitjason on Oct 28, 2020 14:35:00 GMT
Thanks! Yes, just ordered the decals, instructions, and even the CA instruction stickers. I'm going to apply them to magnetic sheets then stick them on. That way, I'll always have them and they won't be that apparent that they're even magnetically stuck to them. I even ordered the father time one.
|
|
|
|
Post by joneske on Oct 28, 2020 14:37:55 GMT
Thanks! Yes, just ordered the decals, instructions, and even the CA instruction stickers. I'm going to apply them to magnetic sheets then stick them on. That way, I'll always have them and they won't be that apparent that they're even magnetically stuck to them. I even ordered the father time one. That's great. I like the magnetic sheet idea. I wonder if Rob could make them that way. |
|
|
|
Post by sittingrabbitjason on Oct 28, 2020 14:42:28 GMT
Thanks! Yes, just ordered the decals, instructions, and even the CA instruction stickers. I'm going to apply them to magnetic sheets then stick them on. That way, I'll always have them and they won't be that apparent that they're even magnetically stuck to them. I even ordered the father time one. That's great. I like the magnetic sheet idea. I wonder if Rob could make them that way. I'll ask him |
|
|
|
Post by elec573 on Oct 30, 2020 5:32:46 GMT
Would like to see your finished fridge. When you’re done, or even some pictures in process . You can post to a third party, and post a link here on the forum.
|
|
I need scews for my plate. Where do I get them and what size?
