gmacy
New Member
Posts: 39
|
Post by gmacy on Aug 8, 2020 22:30:50 GMT
I am dealing a beast ... the ck-30 single ... it had a line broken from the evaporator ... repaired that and vacuumed the system over night ... held vacuum ... nitrogen tested and held fine... now to the r-152a ... how many cans will I need ... this is a big unit
|
|
gmacy
New Member
Posts: 39
|
Post by gmacy on Aug 13, 2020 12:02:42 GMT
I did get it charged with 2.5 cans ... but my concerns are that the dome top gets warm but the outside coils are not ... i get a mild amount of cool on the evaporator line .... stuck float valve? Suggestions on where to go next ... it is running smooth at 3.2 amps
|
|
|
|
Post by ChrisJ on Aug 23, 2020 22:48:57 GMT
I did get it charged with 2.5 cans ... but my concerns are that the dome top gets warm but the outside coils are not ... i get a mild amount of cool on the evaporator line .... stuck float valve? Suggestions on where to go next ... it is running smooth at 3.2 amps Someone else will need to comment as I've never worked on a CK. However. I believe the dome is the lowside so I'd expect it to be cool normally although it is used as an oil cooler. But it's not the same as a CA or DR machine. What was the original SO2 charge weight? |
|
|
|
Post by Travis on Aug 23, 2020 23:35:53 GMT
I thought David suggested it might have NCG's in it and you got it cooling?
|
|
|
|
Post by turbokinetic on Aug 24, 2020 8:08:03 GMT
I thought David suggested it might have NCG's in it and you got it cooling? I think he got it cooling after finding a plugged fitting. |
|
gmacy
New Member
Posts: 39
|
Post by gmacy on Aug 24, 2020 13:50:33 GMT
Yes sorry ... combination of a fitting clogged due to overzealous soldering and a stuck float valve ... she ran smoothly after that ... just need to start on puttin her back together and body work
|
|
