|
|
Post by tkapusta on Feb 6, 2020 4:06:48 GMT
Hey all! Another rookie in the house! I collect fans so this hobby came naturally. I have 2 ck models that both have the handles. They both seem fragile. Work okay but feel like they could give out at any time. Is there something on the inside i can tighten up or something?
|
|
|
|
Post by turbokinetic on Feb 6, 2020 21:08:22 GMT
Hey all! Another rookie in the house! I collect fans so this hobby came naturally. I have 2 ck models that both have the handles. They both seem fragile. Work okay but feel like they could give out at any time. Is there something on the inside i can tighten up or something? Glad to see you here! As said earlier, I don't have much experience with these handles but they seem to be a common item people need. Westinghouse has similar looking handles which fail similarly. I was able to install a piece of steel brake line tubing and solder it in place, to reinforce the worn pin bore; and then build a new pin. Not sure if this would work for GE or not but it's an idea. Sincerely, David |
|
