|
|
Post by richarddaugird on Apr 29, 2019 21:34:10 GMT
I tried a search but no luck. I saw a picture of a CK being transported with the top removed, I am going to pick up my CK tomorrow and I want to build a cradle so I can haul it. Need the dimensions if someone could be so kind.
|
|
|
|
Post by Travis on Apr 29, 2019 22:22:39 GMT
Richard,
Take a look in the CK manual in this section. The images show the depth and length of the deck. You need the crate to be slightly taller than the height of the evaporator, also shown.
|
|
|
|
Post by richarddaugird on Apr 30, 2019 0:14:12 GMT
Thanks.
|
|
|
|
Post by richarddaugird on Apr 30, 2019 3:15:06 GMT
Can you advise as to what page? I need to get to sleep and will be busy tomorrow if I want to gety out of work at a reasonable hour, before my 4 hour expedition to go get this thing.
|
|
|
|
Post by Travis on Apr 30, 2019 5:04:15 GMT
There’s a section towards the beginning with the images.
|
|
|
|
Post by birkie on Apr 30, 2019 13:32:49 GMT
|
|
|
|
Post by richarddaugird on Apr 30, 2019 15:33:34 GMT
Thanks, just what I needed!
|
|
|
|
Post by richarddaugird on Apr 30, 2019 20:52:23 GMT
Thanks again, cradle is built,just waiting on 5:00! I'm pretty exited. I'll be on the lookout for an old stove next, and an early KitchenAid. I am remodeling my house with all antique appliances. I already have many many cast iron/brass blade fans.
|
|
|
|
Post by Travis on Apr 30, 2019 23:54:40 GMT
What model Kitchenaid are you looking for?
|
|
|
|
Post by richarddaugird on May 1, 2019 5:20:59 GMT
Older the better.
|
|
