|
|
Post by Ray on Nov 15, 2014 14:22:58 GMT
My FEA machine is working great, but have some annoying vibration coming from the 3 point compressor mount. Vibration rattle is coming from rear pivot point. Metal to metal contact here. Any thoughts on quieting this area?
|
|
|
|
Post by allan on Nov 15, 2014 16:44:14 GMT
My FEA machine is working great, but have some annoying vibration coming from the 3 point compressor mount. Vibration rattle is coming from rear pivot point. Metal to metal contact here. Any thoughts on quieting this area? Sounds like a new set of compressor mounts is in order. Post some close up pics and maybe we can suggest something to replace them. |
|
|
|
Post by coldspaces on Nov 15, 2014 22:00:36 GMT
Are your mounts unlocked? See the sticky in this forum for instructions to lock an unlock mounts.
|
|
|
|
Post by Ray on Nov 18, 2014 22:54:38 GMT
They are unlocked which I believe is correct running position
|
|
|
|
Post by coldspaces on Nov 19, 2014 0:37:43 GMT
They are unlocked which I believe is correct running position Yes unlocked is the running position. Rear mount should look like this unlocked.  |
|
