|
Post by dowdy42 on Sept 21, 2014 19:32:37 GMT
I recently purchased a FEA-2-B16 it was working great,the wiring was very brittle and coming off everywhere,So I Made myself a wiring diagram to all the components and replace all the wiring soldered all the end shrinks tube around connectors.Plugged it in and nothing,took the relay down and rechecked the connections still nothing.I may have plugged it in before remounting the relay back up right,i have read on here that's a nono,but I`m not sure what to do next.I have power to the relay. Any suggestion would be appreciated.Thanks
|
|
|
Post by coldspaces on Sept 21, 2014 20:04:01 GMT
|
|
|
Post by coldspaces on Sept 21, 2014 20:07:14 GMT
Do you have a watt meter or amp meter to see if it is drawing any power at all?
|
|
|
Post by dowdy42 on Sept 21, 2014 20:37:24 GMT
I`m going to pull the relay down and recheck my connections per the factory wiring connections,I can already tell there different
|
|