|
Post by turbokinetic on Dec 8, 2023 15:20:06 GMT
A while back, I made a rather long video showing the procedure I use to rewire the cooling unit on a CK or CA Monitor Top. That video has been useful to many, according to the feedback I have received. Many people have asked for a cabinet light rewiring video. I had the opportunity to make such a video where I cover as much of the entire process as possible. Hopefully this will help others safely rewire their cabinet. The video covers the following: -Setup of the job (remove the cooling unit) -Removal of the light socket without damage. -Replacement of socket wiring without splices. -Replacement of the door light switch without Textolite removal. -Rewiring the power inlet without splices. -Testing for safety and functionality. The cabinet in the video is a CK-2 cabinet. The process is very similar with all cabinet designs, therefore you can likely use this process as guidance. https://youtu.be/nf4-ZUblPjI For completeness, here is the link to the cooling unit rewiring: monitortop.freeforums.net/thread/2320/ Thanks for your interest! Sincerely, David
|
|
|
Post by ckfan on Dec 8, 2023 15:30:02 GMT
This will be so useful to people, including me. Thank you!
|
|
|
Post by turbokinetic on Dec 8, 2023 15:32:56 GMT
This will be so useful to people, including me. Thank you! Glad you found it helpful!
|
|