|
Post by ChrisJ on May 1, 2021 12:21:00 GMT
What's everyone using for a door gasket on the ball tops these days?
The gap in the door seems tricky to deal with.
|
|
|
Post by ckfan on May 1, 2021 12:31:21 GMT
I just used the McMaster Carr peel and stick gasket. It works fine for mine. There may be a better option though.
|
|
|
Post by Travis on May 1, 2021 13:31:02 GMT
Im also voting for the self stick.
|
|
|
Post by ChrisJ on May 1, 2021 21:51:10 GMT
But what's it stick to? There's a pocket all the way around the door with exposed wood or insulation. I didn't look too close yet but it seemed like the gasket would sink into it.
|
|
|
Post by ckfan on May 2, 2021 11:41:26 GMT
If I remember correctly I just stuck it to the wood. It has been working fine for a couple years.
|
|
|
Post by Travis on May 3, 2021 13:26:06 GMT
There’s a metal edge, a small gap and then wood. A self stick gasket would stick and cover the gap. The gasket should be soft as the ball tops don’t have the mass of the bigger CK’s to mash the rubber gasket.
|
|