peppers
5 Cubic Foot
Hello I am a new member as i just picked up a super clean 1933 GE CA-2-A16 Monitor Top!
Posts: 56
|
Post by peppers on Apr 20, 2021 3:15:48 GMT
I am looking to see if anyone has a control for my 1933 CA-2-A16. Or can they be rebuilt? I have read that David (turbo) has rebuilt some in the past. I may need a new bellows or entire unit possibly. Thanks in advance..
|
|
|
Post by coldspaces on Apr 20, 2021 3:30:40 GMT
|
|
peppers
5 Cubic Foot
Hello I am a new member as i just picked up a super clean 1933 GE CA-2-A16 Monitor Top!
Posts: 56
|
Post by peppers on Apr 21, 2021 3:04:38 GMT
Thanks Coldspaces, I have not but will certainly give it a shot. I am having a problem with mine not turning the machine on and the red dial is stuck in the window. My guess is that it is malfunctioning but I have not had the controls out of the unit yet.
|
|
|
Post by turbokinetic on Apr 21, 2021 14:00:06 GMT
Thanks Coldspaces, I have not but will certainly give it a shot. I am having a problem with mine not turning the machine on and the red dial is stuck in the window. My guess is that it is malfunctioning but I have not had the controls out of the unit yet. If the overload trips and is reset too many times, or reset attempts happen while it is still overheated - this can be the result.
|
|
peppers
5 Cubic Foot
Hello I am a new member as i just picked up a super clean 1933 GE CA-2-A16 Monitor Top!
Posts: 56
|
Post by peppers on Apr 22, 2021 12:40:17 GMT
Thanks Coldspaces, I have not but will certainly give it a shot. I am having a problem with mine not turning the machine on and the red dial is stuck in the window. My guess is that it is malfunctioning but I have not had the controls out of the unit yet. If the overload trips and is reset too many times, or reset attempts happen while it is still overheated - this can be the result. Thank you guys, it came out no problem but had to read coldspaces thread to see how the cover comes off. Was wondering that myself. Great posting by the way coldspaces... lots of detail but looks to be quite the challenge taking one apart. I should get into mine later today and will report back.
|
|