|
|
Post by hawgan on Apr 12, 2021 22:26:53 GMT
Anyone able to tell me the size of the screws in the hinges and handle? This box is a circa 1930’s CA. I’ve done several searches in the forum but haven’t located the info.
|
|
|
|
Post by turbokinetic on Apr 15, 2021 13:54:48 GMT
Anyone able to tell me the size of the screws in the hinges and handle? This box is a circa 1930’s CA. I’ve done several searches in the forum but haven’t located the info. That is a good question. I seem to remember having problems locating screws. Thank heavens for our members here saving every bit and piece of every cabinet which can't be restored - I got original screws. |
|
|
|
Post by hawgan on Apr 15, 2021 21:00:09 GMT
I still have my original screws but I had the hinges and screws chromed and the cabinet powder coated. All of the screws were difficult to get back in but they all went except one. I need a tap to rethread the cabinet hole.
|
|
|
|
Post by don on Apr 16, 2021 12:22:49 GMT
1/4 -24 stainless steel oval head countersunk threaded all the way up to the head - Harley Davidson motorcycles used this thread size but they are chromed steel and not stainless. I think the taps are very expensive.
|
|
|
|
Post by don on Apr 17, 2021 18:28:31 GMT
|
|
