|
|
Post by coldspaces on Nov 29, 2020 15:12:48 GMT
Chrisj was curious about weather unsoldering leads to a compressor could possible loosen the connection at the other end inside of the dome. So since I have a few tops apart I was able to do some testing on the DR1 terminals. Looks like you would have to heat them a very long time to do any harm. youtu.be/ZfqfsmfH-Yk |
|
|
|
Post by turbokinetic on Nov 30, 2020 16:06:13 GMT
Chrisj was curious about weather unsoldering leads to a compressor could possible loosen the connection at the other end inside of the dome. So since I have a few tops apart I was able to do some testing on the DR1 terminals. Looks like you would have to heat them a very long time to do any harm. youtu.be/ZfqfsmfH-YkThanks for the great demonstration! The compressor base makes an excellent heat-sink it appears. |
|
|
|
Post by ckfan on Dec 3, 2020 2:18:02 GMT
Thank you for doing this test. This is good to know that you really can’t do harm by soldering on wires.
|
|
|
|
Post by elec573 on Dec 17, 2020 1:07:29 GMT
That is good information to know. Think it would be information to put toward a newbie list .Weight we don’t have such a list ?
|
|
