New owner of a globe top

fireball1962
New Member

Posts: 1

New owner of a globe top Nov 26, 2020 21:49:15 GMT via mobile ckfan and turbokinetic like this

Quote

Post by fireball1962 on Nov 26, 2020 21:49:15 GMT

Hello,

New owner of a GE globe top in the San Diego area. My unit seems to work ok, but have a question or two for the group.

1. What is the purpose of the threaded exposed stud coming out of the control box at the top inside of the frigerator?

2. My refrigerator gets cold but appears to be on the warm side. Adjusted the screw on the control box out about 4 turn. Does this sound about right?

Thanks!

Travis Administrator Posts: 2,875	New owner of a globe top Nov 27, 2020 5:47:44 GMT via mobile ckfan and turbokinetic like this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Travis on Nov 27, 2020 5:47:44 GMT The temperature adjustment is the unmarked knurled shaft pointing down when you look up at the unit with your head inside the door.

ckfan Administrator Posts: 2,868	New owner of a globe top Nov 28, 2020 0:06:27 GMT via mobile turbokinetic likes this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by ckfan on Nov 28, 2020 0:06:27 GMT I would read the section on adjusting the control for a CG which is located in the scotch yoke service manual. You can find that in the top of the CK section.
	I have to keep telling myself that this is a healthy addiction! It is all in the name of preserving and enjoying these wonderful machines.

Post by fireball1962 on Nov 26, 2020 21:49:15 GMT

Post by Travis on Nov 27, 2020 5:47:44 GMT

Post by ckfan on Nov 28, 2020 0:06:27 GMT