|
Post by rollerball on Nov 26, 2019 20:35:25 GMT
NEWBIE- I'm looking for a wiring diagram for a Frigidaire LOX1212 it's out of vintage Coca Cola machine which it's the original compressor. Everything is cooling and working great but the wires are brittle an need replacing. I have (2) compressors both cooling great but wired differently,
The first compressor has a junction box and it appears that the service line from the outlet feeds power to the box from the inside of the box another wire is going out to feed power to the C, R, S, on the compressor. The 16 gauge wires left over (2) for the temp control and to for the evaporator fan are also wired in. I'm missing one hot wire that basically would be like a lamp wire ( feeds a terminal strip for a sold out magnet, and a empty light.
The second compressor it appears they are getting all the power through the temp control does not look correct as the wiring looks like it's been replaced years ago.
I watched a few video that Turbo Kinectic did on his YouTube channel and the junction box look exactly the same as mine . The wires are labeled but it's hard to tell in the video what's what. Thanks!
|
|
|
Post by turbokinetic on Nov 27, 2019 9:53:20 GMT
NEWBIE- I'm looking for a wiring diagram for a Frigidaire LOX1212 it's out of vintage Coca Cola machine which it's the original compressor. Everything is cooling and working great but the wires are brittle an need replacing. I have (2) compressors both cooling great but wired differently,
The first compressor has a junction box and it appears that the service line from the outlet feeds power to the box from the inside of the box another wire is going out to feed power to the C, R, S, on the compressor. The 16 gauge wires left over (2) for the temp control and to for the evaporator fan are also wired in. I'm missing one hot wire that basically would be like a lamp wire ( feeds a terminal strip for a sold out magnet, and a empty light.
The second compressor it appears they are getting all the power through the temp control does not look correct as the wiring looks like it's been replaced years ago.
I watched a few video that Turbo Kinectic did on his YouTube channel and the junction box look exactly the same as mine . The wires are labeled but it's hard to tell in the video what's what. Thanks!
Hopefully the PM's we had about it have helped you to build a new wiring harness!
|
|