|
Post by coldspaces on Sept 14, 2020 3:09:05 GMT
|
|
|
Post by mathewnv on Sept 18, 2020 16:12:49 GMT
top is back in place, all the wiring is done (the light and new push switch are not hooked up but are tested), letting it run for a few hours today to test the thermostat, if all goes well, I'll pull the top again and finalize the wiring, deciding if i need to strip the bottom or if a sand and paint is good enough, a couple more minor things to address, then .. Off to Craigslist or the like. it is cool I just have no space for it.
|
|
|
Post by mathewnv on Sept 20, 2020 16:50:00 GMT
top with 2nd coat of epoxy white, bottom/door 1st primer coat drying
|
|
|
Post by coldspaces on Sept 20, 2020 22:01:00 GMT
Lookin Good!!
|
|
|
Post by turbokinetic on Sept 20, 2020 23:28:35 GMT
Yes it is! He put some shine back on that!
|
|
|
Post by mathewnv on Sept 22, 2020 19:43:37 GMT
Waiting on new door gaskets, and the material to make the interior trim pieces, and all done, just tested all the electrical connections and it is all good to go.
|
|
|
Post by mathewnv on Sept 27, 2020 20:44:47 GMT
waiting for the material for the interior trim then I think I'm all set
|
|
|
Post by Travis on Sept 28, 2020 0:40:01 GMT
That looks great. I believe you have a late model with a cabinet light.
|
|
|
Post by mathewnv on Oct 2, 2020 19:35:29 GMT
yeah the light was there from day one I replaced it the porcelain was cracked but the pass though the wall is clearly original. Just finishing up and off to Craigslist and Ebay we go. Asking 1500, see if here are any takers.
|
|
|
Post by turbokinetic on Oct 3, 2020 4:25:30 GMT
yeah the light was there from day one I replaced it the porcelain was cracked but the pass though the wall is clearly original. Just finishing up and off to Craigslist and Ebay we go. Asking 1500, see if here are any takers. That turned out very well! Thanks for sharing the end result. Hope it sells quickly to someone who will really appreciate it!
|
|