|
Post by turbokinetic on Mar 20, 2023 1:16:17 GMT
There is definitely something wrong. Is a part missing from the cabinet frame where the latch pin fits? Way too much clearance. I just noticed the screw holding the latch to the inner door panel is missing, allowing the latch mechanism to move and creating the larger gap. Is it the same screw as the others holding the inner door panel, or is it a special machine screw? If it's the former I'll just use one of the door panel screws. If not I'll have to look at what Ace Hardware has. flic.kr/p/2onVV7MEdit: I went ahead and moved one of the screws and felt the screw as it went into the mechanism. Same thread size/pitch. I tightened it up and the door now seals properly! Time to cancel my Trim-Lok order and buy some more of the 3/8" seal from Lowes (I only bought one pack, but two were needed). That's a good finding! Hopefully it saved the latch from getting broken by the loose motion, over time, and causing you a big headache!
|
|